Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Tomwendt

Hydro swap

Recommended Posts

RayS

You could. You would have to weld in a piece of metal in the frame for the hydro control handle. It may be easier to just find a 3400 - 7000 series frame.

You would also need the transaxle for the Sundstrand. The Vickers transaxle is different mounting holes. The pumps won`t interchange between the two different transaxles.

Share this post


Link to post
Share on other sites
RayS

The complete rearend will fit. You will still need to weld the bushing into the frame of the 3300 series from the 716 or uses the frame from a 3400, 7000 simplicity or 700 series Allis. Do you still have the 716 frame?

Share this post


Link to post
Share on other sites
RayS

Everything is the same except it has the tube located in the correct location for the Sundsrand hydro lever. If you are going that far it may be easier to just switch what is needed from the 3300 series over to the 716H.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×