osenga Posted June 9, 2014 Posted June 9, 2014 Ok fast question when I remove the power steering from a 1920 going to someday install onto my 916 I need the control body the cylinder and the steering column. The hoses are shot what else do I need to remove yet
BLT Posted June 9, 2014 Posted June 9, 2014 There isn't much more you can salvage. Support bracketry would be different.
PhanDad Posted June 9, 2014 Posted June 9, 2014 Check the Sovereign PS install instructions and take everything you can find. Here's a link to the instructions: http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=jgEBGP_dqH5tG7EPl7mRgtLvBCd6 You need the steering column mounting plate and steering wheel, the cylinder mounting bracket, and the steering arm assembly and associated spacer at a minimum.
osenga Posted June 9, 2014 Author Posted June 9, 2014 I'll have to see if it is there. This got a little warm this past Friday .
BLT Posted June 9, 2014 Posted June 9, 2014 Here is the 1920 parts book to compare. http://bsintek.basco.com/BriggsDocumentDisplay/heCBEN8apM6rE3CNg54bp796Dq.pdf
Recommended Posts