Power steering removing from a 1920

[osenga]

Ok fast question when I remove the power steering from a 1920 going to someday install onto my 916 I need the control body the cylinder and the steering column. The hoses are shot what else do I need to remove yet

[BLT]

There isn't much more you can salvage. Support bracketry would be different.

[PhanDad]

Check the Sovereign PS install instructions and take everything you can find. Here's a link to the instructions:

http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=jgEBGP_dqH5tG7EPl7mRgtLvBCd6

You need the steering column mounting plate and steering wheel, the cylinder mounting bracket, and the steering arm assembly and associated spacer at a minimum.

[midnightpumpkin]

Don't forget the "T" for the return line.

[osenga]

I'll have to see if it is there. This got a little warm this past Friday .

[BLT]

Here is the 1920 parts book to compare.

http://bsintek.basco.com/BriggsDocumentDisplay/heCBEN8apM6rE3CNg54bp796Dq.pdf