BLT Posted June 30, 2014 Posted June 30, 2014 Welcome to the club. This should be the seal and gasket set you are after: 686632k Gear Pump Kit. It is a Parker Hannifin number and they have stores all over.
marksr Posted June 30, 2014 Author Posted June 30, 2014 what about the Directional Control Valves Parts
ReedS Posted June 30, 2014 Posted June 30, 2014 I think if you'll search the resources section there is a reference to an article on overhauling the control valve. Most parts are reused but the O-rings are off the shelf items that can be bought at your local napa or hydraulics shop.
GregB Posted July 1, 2014 Posted July 1, 2014 Here's the link to the re-build article. '>http://www.simpletractors.com/club2/articles/hydraulic_lift.htm The Parker kit mentioned above is only for the pump section. O-rings can be had at a local supplier, or send me an e-mail or PM. I have o-ring sets minus the large tank one, that I have sold to a few members.
Recommended Posts