Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
peterinbrooklyn

Poor mans power steering question

Recommended Posts

Talntedmrgreen

These are the #'s I use...came from a member here. There are other mfg#'s that cross to these sizes. I buy this size in bulk now. Enough to do 10 or so tractors and it lasts me a little while ;)

¾ ID x 1 ¼ OD

(2) Koyo # NTA-1220 needle roller bearings ¾ ID x 1 ¼ OD

(2) Koyo # TRB-1220 hard thrust washers 1/16”

(2) Koyo # TRA-1220 hard thrust washers 1/32”

Share this post


Link to post
Share on other sites
RayS
quote:Originally posted by thirdjoker

1st I've heard of this. where can i find a post on this


id="quote">
id="quote">The link below is a how to post. It also has a link to the original post.http://www.simpletractors.com/club2/topic.asp?ARCHIVE=true&TOPIC_ID=121649&SearchTerms=poor,mans

Share this post


Link to post
Share on other sites
rich_kildow

I"m going to order some of these to do this mod but I see people doing it with both the upper and lower washers being 1/32" as well as 1/32" and 1/16". Does it matter, and if so, I assume the 1/16" goes on the bottom to take the weight better?

Share this post


Link to post
Share on other sites
MikeES

I have order these sets from Grainger. All are INA brand, which I believe is German.

Bearing - 4XFN4 $3.73

Thin Thrust washer - 4XFR2 $1.29

Thick Thrust washer - 4XFT7 $2.76

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • Sw1966
    • a_sannine
    • bnolt
    • SmilinSam
    • simplewrench
    • Tom45
    • littlefan
    • PhanDad
    • Bill725
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • SonOfCreepfeed

      SonOfCreepfeed

      Thinkin' about this old girl.

      · 2 replies
    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 1 reply
  • Adverts

×