edlincoln 0 Posted March 20, 2015 I bought a big ten parts tractor a couple weeks ago and the axle tube is broken about 1/2" outside of the seal on the right transaxle case. I have already removed both axle flanges and the differential unit, I printed the dif manual from a transaxle repair I found here. There is some steel sticking up in the cracked area do I just grind that area down to get the right side of the trans off? I removed and separated the trans and bevel gear box already. Share this post Link to post Share on other sites
Bill725 1,177 Posted March 21, 2015 When you put it back together, make sure to put a plastic bag over the RH side of the axle tube to cover the differential keyway to protect the axle seal from getting damaged. Share this post Link to post Share on other sites
dentwizz 6 Posted March 22, 2015 Also make sure to note how many spacers go on either side of the axle gear. The manual's diagram is representative only(found the hard way.) Share this post Link to post Share on other sites