Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
isetta

Ark 600 loader control levers

Recommended Posts

isetta

Putting a loader back together. Has control valve just like the one pictured below but came with nails and wire holding the hydraulic control levers in place. Anybody know if those are 4 individual screws for the levers and link plates or do the levers pivot on one long screw? Also the link plates from lever to spool valve shaft seem to have holes much larger than the levers so lots of slop. Are there supposed to be spacers in there? Any advice appreciated.

loadercontrol.jpg

loadercontrol.jpg.ddb98717ab449bc294eba2489b48d114.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×