Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
GLPointon

My 1st load from a closed Simplicity dealership

Recommended Posts

GLPointon

I finally found a closed Simplicity (and other brands) dealership that will sell me anything left on the shelves. There's not much left but I can find lots of useful parts. Here is a look at my 1st pic...To start I found some pretty cool Simplicity stuff for my shop.I also got some mower vac boots, linkages, snow plow angle rod, etc.

DSCF6513.JPG

DSCF6516.JPG

DSCF6518.JPG

DSCF6522.JPG

DSCF6523.JPG

DSCF6524.JPG

This is a Hydraulic angle kit for a Legacy Dozer Blade, it has the valve body, lines/hoses, cylinder, etc...It looks just like the one on my Deutz 1918 (Sunstar) too..?

DSCF6525.JPG

DSCF6526.JPG

DSCF6528.JPG

DSCF6530.JPG

The next 3 boxes are new Turbo-vac's

DSCF6537.JPG

DSCF6539.JPG

DSCF6540.JPG

DSCF6541.JPG

DSCF6545.JPG

DSCF6543.JPG

DSCF6544.JPG

I'm going back for a load of OEM belts, dethatcher, and there is lots of Briggs, Kohler & some Brinley, Deere, Cub parts too...

DSCF6513.JPG.0be040f980eb2b91a321bc7d54af12f5.JPG

DSCF6516.JPG.d52929c47e80b20eeba6249c590747d0.JPG

DSCF6518.JPG.161648cd631f9fa4b0a095655a165f85.JPG

DSCF6522.JPG.a2233d9ae7ee61286ae01c13dd50b24c.JPG

DSCF6523.JPG.0afdb2085ccbf24504852d22cb29ad53.JPG

DSCF6524.JPG.a630768d9bab6c21610cc069b825f0d0.JPG

DSCF6525.JPG.89ef9b2a36e08cc4cd34365e8a8ee04a.JPG

DSCF6526.JPG.446832c70d02d8e6586fc61d9740081b.JPG

DSCF6528.JPG.ec85c991a6dff08a2313c8a094dcb43f.JPG

DSCF6530.JPG.aad48fa302f84cc54fc188de1f1ab1de.JPG

DSCF6537.JPG.b53b27423cb666e968d03d2f812f527a.JPG

DSCF6539.JPG.4cf9f7d722dba2b417c8362f51902dcb.JPG

DSCF6540.JPG.71bea43d1594ecedf2c794d2e91e9ed4.JPG

DSCF6541.JPG.17a2610dfeab2d51b14a4c4ffec1ffe7.JPG

DSCF6545.JPG.8821a1db43c6d1f3b09645ff1e653146.JPG

DSCF6543.JPG.2c974259fd1212ebd46d602c88fdaa83.JPG

DSCF6544.JPG.6ae638b8f78e643f3420e420f00bf611.JPG

Share this post


Link to post
Share on other sites
GLPointon

Not too far away. The flags I'll keep unless I find more when I go back. The place is about 4000 sq ft, 90 degrees upstairs and no power...so I'll go back prepared w/bright lanterns/lights, etc.

quote:Originally posted by Simplicity7013H

Nice haul. Is this dealer local? Would you ever sell your flags?:D


id="quote">
id="quote">

Share this post


Link to post
Share on other sites
SmilinSam

If that's the angling kit where the control sits in the fender where the cupholder would be, I always thought that would be cool to make that run a 3 point on the legacy independent of the tractor lift.

Had a chance to buy one on Ebay for a couple hundred $ a while back but missed out..

Share this post


Link to post
Share on other sites
GLPointon

Sam, it has a "post" that the valve body mounts to on the right side, in front of or above the fender..?

I was looking at it, the valve is a "power beyond" valve so it could be used with about any hydro system. It got my wheels turning too...

Share this post


Link to post
Share on other sites
Sign in to follow this  

×