Time to mow again

[Willy 2]

Well it mowing time again,(every 4 or 5 days.

I'm holding my breath, hopping I can get it done

without something going wrong again.

Last Monday I started mowing with the 916 and an arbor

bearing blew and wrecked the arbor beyond repair.

I switch it with a 48" foot Dragger deck and a bearing

went out of that one, I finished with the old reliable

Big-10,and by the time I finished it had a noisy bearing.

I replaced the bearings in the 48" F.D. deck.

Now need an arbor for the 916 deck and a whole lot of bearings.

Quite sometime ago someone had a site for arbor bearing I

copped it down, but lost it when my computer went down. If anyone

has a source I would appreciate it.

Also would like to hear from anyone with a spare arbor.

Thanks Willy

[Hotwire7434 0]

Your bearing should be 108202. This is from a link I saved I think it is correct. Maybe can cross ref. at a parts store. Here is a link I got it from . Hope this helps.

http://www.sjmparts.com/bearing-108202-st230160-p-10209.html

Link still works cost $6.77 ea.

Tom

[RayS 79]

here`s a bunch of options on eBay. I may have a spare center arbor as well.

http://www.ebay.com/sch/i.html?_odkw=bearing+108202&_osacat=159912&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=bearing+108202&_sacat=0

[Hotwire7434 0]

Willy,

Take a look here as well.

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H1.XBearings+108202.TRS0&_nkw=Bearings+108202&_sacat=0

[Hotwire7434 0]

Looks like we covered the same place Ray, always there with help Ray that is what I like about the club. Wealth of knowledge and assistance. You sold me a parking brake lever for my AC 916H since then I had to repower it with a HF 22hp working great after a friend machined a adapter for the drive shaft. Have a safe and wonderful 4th

Tim

[Willy 2]

quote:Originally posted by RayS

here`s a bunch of options on eBay. I may have a spare center arbor as well.http://www.ebay.com/sch/i.html?_odkw=bearing+108202&_osacat=159912&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=bearing+108202&_sacat=0

---

id="quote">

id="quote">I need an outside arbor but the housing should be the same.would you PM me the price?Thanks for the info. It's good to have someone with the knowledgewe can depend on.

[dentwizz 6]

If you go with a generic(which I do often enough) prior to installation check the grease. Sometimes the generics don't have much or it is inferior grease, which is easy enough to remedy when it is out.

[Willy 2]

quote:Originally posted by dentwizz

If you go with a generic(which I do often enough) prior to installation check the grease. Sometimes the generics don't have much or it is inferior grease, which is easy enough to remedy when it is out.

---

id="quote">

id="quote">Good idea, I have a needle attachment for the grease gun I canusually get behind the seal,I use wheel bearing grease on bearings.

[GrincheyOne 52]

I used this from a reference off of EBay...

http://www.VXB.com

800-928-4430

Kit8521 Z9504B Bearing 3/4"x1 25/32"x39/64" inch Sealed Z9504RST Ball Bearings $4.95 ea.

This bearing is generic across many models of decks. same as the 108202

Wayne

[Willy 2]

quote:Originally posted by GrincheyOne

I used this from a reference off of EBay...http://www.VXB.com 800-928-4430Kit8521 Z9504B Bearing 3/4"x1 25/32"x39/64" inch Sealed Z9504RST Ball Bearings $4.95 ea.This bearing is generic across many models of decks. same as the 108202Wayne

---

id="quote">

id="quote">Thanks Wayne

[RayS 79]

Willy, I sent you a private message of the spindle I have with a picture.