hydraulic unit seal

[carter 0]

Any decent automotive store has o-rings for sale. They are almost all industry standard sizes. If you have the ring take it to them for a match. If not measure the groove and bore and they can probably figure out the correct part number. Ron

[Dave-Saratoga 1]

anyone have any suggestions for replacing the o-ring seal on the hydraulic reservoir. the part is no longer available from simplicity. thanks

[TomSchmit 56]

You can probably still get the correct dimensions for the o-ring from Simplicity - just send them an e-mail through the official site. You can them be sure you will get the correct aftermarket o-ring.