hydraulic lift parts and l 10 loader parts??

[mwells 8]

Has anyone ever rebuilt the square tank hydraulic loft pumps be for and where did you find parts like a seal kit? Same question on the l 10 pump. Thanks!

[huffy 2]

As to the hydrolift pump, this thread should help you. There's a link in there to write ups of rebuilding both the round and square tank pumps, and some info re the seals and stuff.

http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=40986

[Talntedmrgreen 1,980]

The L-10 loader hydraulic pump is a Cessna #G20430 (number found on the edge of the mounting flange). I found a kit, by simply calling Cessna parts houses in 2011. Found mine at Knighthawk in Missouri (http://knighthawksupply.com/cessnapumpid.htm). The fella had to dig around a little, and I was probably on the phone for 30+ minutes, but he found it, and it was dead-on.

Rebuild kit part #CE-24100-901:

seal, diaphragm, 2 gaskets, 2 springs, and 2 steel balls.

Reservoir gasket, top. AGCO Part # 71132402

Reservoir gasket, bottom. AGCO Part #71131016

Reservoir/pump bottom O-ring. AGCO Part #70923850

If you just need a seal, dimensions are 1.0 OD x 0.5625 ID x 0.25 thick. Here are examples that work:

-National part number 472705 (http://www.amazon.com/National-472705-Oil-Seal/dp/B000C5J10S)

-SKF part number 5606 (http://www.ebay.com/itm/SKF-5606-Oil-Seal-New-Grease-Seal-CR-Seal-/290613230222)

[Talntedmrgreen 1,980]

BTW...the information above is a blend of info Wes gave me (acb10_64) and research. Turns out, early Danco loaders used the same pump (think Wheelhorse, Cub, Deere etc)

[mwells 8]

Thanks so much for the help guys! This should get me back together!

[Talntedmrgreen 1,980]

Better hustle...15 days.

[mwells 8]

Trying!! There's going to be a lot of late nights!!!

[powerking_one 0]

I purchased the Parker-Hannifin hydro lift pump repair kit a number of years ago from Aberdeen Dynamics in Tulsa, OK. The PN number is 686632K "D" repair kit. It is the same for either the round or square tank units. They still stock it and the current price is about $49.00. To reseal the square tank, I used Permatex "Great-Stuff" which seals/forms a new gasket.

Their numbers are:

Phone: (918) 437-8000

Toll Free: (800) 727-4955

Hope this helps also,

Tom (PK)