Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

B207/208


720nut

Recommended Posts

Chris, I've had an add on here for probably 2 months and no responce so thought I'ld post here in hopes of finding one. I want to restore tractor but would like to have a grill before I start. I took a trip to Joshs to pick up sno-blower for it and look at his, I can make one but seems to me that there should be some out there somewhere. If yours would have a grille I would have contacted you when first put up.I'll buy tractor if reasonably priced, but has to have a good grille

Link to comment
Share on other sites

Here you go Lloyd. PM me if its something you're interested in. Top view

top.jpg

Grill

front view.jpg

Side View

side view.jpg

couple problems...Dent in the lower part of the grill. Probably can be pounded out with a dolly and hammer.

dent.jpg

Relief cut into the hood for the oil fill cap. This tractor had a replacement engine put into it. It almost fits.

relief.jpg

top.jpg.d4ca359b959037f0e4024d5925bc01f6.jpg

57e061dda8622_frontview.jpg.385a2a7befa13265d99c78407b9dcb03.jpg

57e061ddb827e_sideview.jpg.e57ff2ad715156b801fca7295d6e302f.jpg

dent.jpg.3546fd4b75a315d478101bc87b9c82bd.jpg

relief.jpg.3dbf235781237b07dfa08ea879c09196.jpg

Link to comment
Share on other sites

Lloyd, I would not think so. It is just made of about 1/16 inch steel, perforated with a bunch of holes. I would think if you could find a piece, you could fabricate one.

Link to comment
Share on other sites

I too have been looking for a grill for a b207,years have went by and I have not come across one yet,i also been looking for a b112 one to,no usable grills for them either it seems.

Link to comment
Share on other sites

We were just at the new Menards here in Ann Arbor and I believe they may have a piece of metal that may work it's not chrome though. It's about the same material as B110 grille.

Link to comment
Share on other sites

Mine is not chrome. It's painted black. It's not flat, it has a bunch of bends in it. Looks kind of like this from above,

|_/-\_/-\_/-\_/-\_|

You get the idea? But a flat one painted black would look good in my opinion.

Link to comment
Share on other sites

Thanks Mike, if I were to make several would there be any interest? If I have to buy full sheet need to recoop some of my expense.Here's the sheet just got at Menards so will be making one

grillemat 002.JPG

grillemat 001.JPG

57e061e3d419e_grillemat002.JPG.c3977f5996627de53ca90c651d5c0a11.JPG

57e061e3e2dd2_grillemat001.JPG.fbf53fcafe4d052a7fae7c21c5c7c91e.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...