Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Loader ?


MPH

Recommended Posts

Does anyone have a loader mounter on a 3314 or newer model tractor?

Was digging leaves into a pile of horse manure I had delivered this summer with the wards gilson and was impressed with how it did. Sure would be nice to have it on a real tractor, like that 7016 I drug home a couple years ago.

Link to comment
Share on other sites

I did one on a 7116

real challange to brace BGB

Al Eden did one

He put a complete frame under it like they do for Power Max

Link to comment
Share on other sites

You can do it Marty. We've seen your ingenuity.

You just need to tie the front to the back to bridge the bgb.

When I did the Homelite with Kwik Way loader, I just laid the subframe on the ground under the tractor and added brackets to match the tractor.

Pretty sure I attached to the rear hitch points with tabs welded to the frame, and to the center under the battery / gas tank area.

If you could also tie to the center bolt in the front axle it would help too.

I think someone has drawings for the original loader frame, that would need to be modified for your longer wheel base.

As long as it's a dedicated loader, and you are not worried about all the angles to put a mower deck under your loader it's not bad.

I don't know if the side plates are the same between 3300 and 7000 series, but I still have all the custom plates Kirk (thedaddycat) made years ago to bridge around the bgb.

Link to comment
Share on other sites

×
×
  • Create New...