Transmission exchange

[RedRock]

Would a transmission/rear end from a 7112 work in a 7013?

[1978Simplicity7016H]

If it's a three-speed it will work, and as long as the 7013 has the hole where the Vickers hydrostatic/shuttle lever would go(upper hole), or if it's new transmission is a Sunstrand, the lower hole, any transmission should work in the 7013.

[Simplicity7013H]

My 7013 is the limited production with a Vickers Hydro. The Vickers are a sweet operator and much smoother than the Sundstrand's. I just got a 7016H with a Sundstrand and its very jerky in the control compared to the Vickers. But, as my cousin states, any tranny should work with the proper levers/linkages.

[RedRock]

Thanks for the thorough information; it's helping me decide what to do next.