Vaccum collector bearing

[GregB 941]

I had to mount my extra collector blower because of a bad wobbly shaft. The vibration was so bad it cracked the sheet metal.

Tried to look-up the bearing, NLA for any of the numbers I tried.

Anyone source a off the shelf bearing, Or am I

[Gary 101]

I know that I got one from NAPA, a few years ago. Don't remember the Part number, but I'm sure that someone here has it.

[GrincheyOne 52]

Greg, try...

http://www.vxb.com

Just give them the ID, and OD of the original

they are very helpful, and reasonable$.

800-928-4430

Good Luck,

W

[CTD01 100]

. Jacks had these last year but i see nla now. I have a spare on the shelf for mine. A bit pricey but here it is http://simplicity.partstockpile.com/index.php/123087.html

[PhanDad 3,618]

Jacks has the same part #2123087SM listed as available as a Murrary part for a bit less.

I've bought Snapper branded parts with the same part number and gotten the part I needed. Murray has been Briggs for awhile, so it should also work but no guarantee.

[GregB 941]

Yea I did see that one Bill.

But without a picture ?

I guess I will tear it apart, and see if I can just press bearing out of housing, and off the shaft.