3416 snow blower

[JONNYCASH 0]

could anybody tell me the pulley dia. to drive the snow blower. I have a 3416H with front drive blower I don't have the front pto so I was just putting on a pulley but need to know what size to get. thanks

[Horvik 31]

Hello;

I think your best bet is to purchase a used factory PTO either mechanical of electric. Sometimes you can get lucky with fleabay on these.

[drbrian722 0]

IIRC it's a 7 inch pulley on the front PTO

[Mike_H 92]

I have a Front PTO I could sell you. Needs to be relined, but other than that, its complete

[PhanDad 3,616]

My A/C built Homelite front electric PTO is about 6" OD, but the belt rides way down in the groove making the effective diameter about 5". The Homelite snow blower driven pulley is 7" just like the RBT Simplicity tractors.

Measure the diameter of the mid cone clutch, the 7" driven pulley snow blowers are designed to be driven by it. That would get you the correct size.