cub cadet help please?

[hurleyii 227]

So does anybody know the difference between a wide frame cub and a skinny? Trying to do d a 3 point for my dads super garden tractor

[720nut 4,225]

Harley, older cubs were all narrow frames newer went to wide frame not sure what model but noticeably different. narrow frames were 1/8in thick where newer were thinner material. If I remember right both were the same width in rear as they both used same cast rearend, this is prior to being bought out by MTD I believe. I can get picture of a narrow frame later if needed.

[phillobbezoo 139]

My dad has a super garden tractor with a 3pt on the back, I think it's a 2182? We took frame off a smaller 16 horse tractor everything bolted right up I just had to refab the lift linkage. Check out Extremmotorworks they build 3pt hitches for all cub tractors and they have some other cool stuff to check out

[hurleyii 227]

What about the PTO for a rear tiller my dad keeps talking about?

[BLT 718]

Here is another forum that could help you out. http://www.mytractorforum.com/19-cub-cadet-forum/

[phillobbezoo 139]

Those ptos are hard to come by, good luck keep your eyes on eBay and get ready to pay up for one if your lucky enough to find one

[edlincoln 0]

I have a pto off of a cub cadet 123. It bolts to the plate on the back of the transaxle. I do not intend to use it and don't have a tiller. The worst part it might take 30-50 to ship from Washington state.