Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sunstrand questions


rokon2813

Recommended Posts

First, I want to get me facts straight, there was an early and a later model pump correct ? The early had a remote filter between the frame plates, and the later had the filter right on the side of the pump?This pump, without a filter, has these 2 bolt heads sticking out next to the gear so this early pump would not bolt up to a later transmission as there are no holes in the transmission case for these bolt head to set into.

pump bolts.jpg

The later pump does not have these bolts, so it will bolt to an early transmission.In doing this, I now have a transmission with 2 filters. Next question would be, can I run it with both filters, and if not, which should I remove ?, IE which system is better ? If I want to go with the remote filter only, can I take the block off plate off this pump, and put it on the other pump in place of the filter ?? Or should I just remove the remote filter system ???

block off plate.jpg

57e05adfb6fad_pumpbolts.jpg.618b3475f68539c56be9e9f6c7fa7104.jpg

57e05adfc83dc_blockoffplate.jpg.5c0de998f3765bf904935243ac7318c7.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...