sovereign 18 hp simplicity tractor

[a_sannine 854]

long story short I got this tractor with blown engine , wanna replace it with K301 I have , how to do the wiring part so it will be charging the battery

thanks

[BLT 718]

What engine was in tractor or what is tractor product number, 169XXXX?

[a_sannine 854]

sovereign 18 hp command , serial number 2305503

[BLT 718]

Did your 301 Kohler come out of an A-C/Simplicity Tractor?

[BLT 718]

quote:Originally posted by BLT

Did your 301 Kohler come out of an A-C/Simplicity Tractor?

---

id="quote">

id="quote">Anyway, if your donor engine has a 12V start/charging system, you'd need a starter relay and maybe a Bosch relay. The command has a grounded self energized mag and the "K" probably has a 12V points/ coil system.The "K" may have a split circuit 12V5A DC and 12VAC charge system or a 15Amp 12V regulated system like your Command has now., so you might have to rewire head light circuit for AC. The Command starter is clutching type with its built in relay and "K" starter is an inertia with a remote relay. There should be a spot in the ignition switch where you power your coil. Not too bad.

[a_sannine 854]

quote:Originally posted by BLT

Did your 301 Kohler come out of an A-C/Simplicity Tractor?

---

id="quote">

id="quote">yes out of Allis 912

[a_sannine 854]

BLT thanks for the good info , I have to figure it out soon

[BLT 718]

Here is electrical portion of Simplicity repair manual.

http://www.thepowerportal.com/simplicitytechpubs/TP_500_973_01_SV_SMA_Sec3.pdf ...Figure 3-28 is what you should have.

I'm taking a stab that this is where you got your engine.

http://bsintek.basco.com/BriggsDocumentDisplay/heCyEN8ctF0rE3CGh54bp796Dq.pdf

[a_sannine 854]

BLT thank u