Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Belt size for simplicity allis 3110


Bryan110

Recommended Posts

Really need more info to answer the question.

Assuming your tractor has a cone clutch mid PTO, a 48" deck uses a Simplicity part #163011 belt (71.6"); a 42" deck uses a Simplicity part #176439 belt (74.1").

I think early 3410H's might have come with a mid PTO that hangs down. If your tractor has that, it needs 2 belts to drive the deck (not counting the arbor drive belt).

Link to comment
Share on other sites

What I need it the belt to the center arbor to the pto on the tractor I have one that drives the pto off the bevel gear box and have the one that turns the blades I don't have the one from the pto to the deck

Link to comment
Share on other sites

Well lets see, to start with I'm pretty sure they didn't make a 3210 Hydro. But both 3212 Hydro and 3210 Variable share parts.

Next is deck size, both were available with 42" and 48" decks.

Next is both came originally with a double V belt.

42" deck takes belt 2168171 double V 48.9 inches long.

48" deck takes 2108854 double V 45" long.

If your tractor has been converted to single V pulley's all bets are off.....

Under the heading Technical Tips and Articles, 4th sticky topic down is Belt and Blade reference 2008.

Using that, anyone can look up their belt numbers. At the end is a reference chart giving dimensions.

And, Welcome to the club!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...