Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

msasso

B12- Need some breakdown instructions

Recommended Posts

msasso

So I just got out of a long divorce (3 years). bought my ex out of the house and i am once again ready to start playing with my herd of tractors.

I just purchased a Panzer (unbelievable find on Long Island NY)and I am using it to pull the other guys out of the shed and such.

As you can imagine the first one I wanted to pay attention to was my big B12. But it won't start. there is no spark. went through everything I could (points, etc...) but a live mouse did run out from under the cover and there is a huge mouse nest under it. I am assuming the bastard chewed through something. I have never had to break the tractor down and I was hoping someone could point me to a breakdown article or give me the minimal steps to get the cover off the engine. I've worked on these old tractors enough to know its wise to ask before you start ripping stuff apart. Thanks in advance for your help

Share this post


Link to post
Share on other sites
msasso

I'm going to reply to my own message here. Looks like it's easy enough to just yank the engine and go from there. Might as well do a total cleanup.

Next question. The engine cover is completely rusted through on the bottom where it sticks through the frame. What do the rest of you guys do about this. weld it or look for a new cover?

Share this post


Link to post
Share on other sites
rokon2813

Depends on what you want. You can go to all the trouble to weld it all up if you want the original numbers, or just find a used replacement cover. They pop up on ebay quite often.

Other than a capture nut versus through hole here and there, pretty much any cover from 10 hp to 16 hp will fit.

And you are correct, if you want to get under that cover, pulling the engine is the only way.

Pull the hood, grill, side covers to get to the drive shaft, wiring, and engine mount bolts. It is pretty simple. Getting the 2 drive shaft bolts out of the flywheel can be a pain, not much room in there, but not real bad.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Who's Online (See full list)

    • PhanDad
    • Brettw
    • simplewrench
    • CarlH
    • bud119195
    • Ken7790
    • s_stephen
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 1 reply
    • thedaddycat

      thedaddycat  »  SmilinSam

      It's in pretty sad shape, but yes I have a yellow plastic cap that I'm fairly certain is what you need. PM me your details and I'll get it out to you.
      · 0 replies
  • Adverts

×