Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Electric Lift Switch


grayp

Recommended Posts

Where exactly on a Simplicity large frame tractor did they mount the electric lift switch?

Was it in the lower dash? Upper dash?

My 7000 Series doesn't seem to have a open hole in the lower dash and the upper has some holes with little black plastic plugs. Thoughts are appreciated

Link to comment
Share on other sites

Top dash, lower hole is the "factory" position. I've also seen it installed in the upper hole. From the install instructions:

ElectricLift_Switch_Postion.JPG

The instructions can be downloaded from the Briggs manual site. There were at least 3 mfg#s for the electric lift kit: 990392, 1690043, and 1690392.

ElectricLift_Switch_Postion.JPG.2ff8b02c9a3d1eca1bbd53351dde2716.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...