Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Kohler k341 needs help


Mike

Recommended Posts

Ok so thi stractor I sold my Neighbor lost compression due to a burnt piston caused by overheating.

916.jpg

Piston is stamped standard, the question is, is it possible to replace the standard piston and rings without doing a total rebuild.Cylinder is not damaged. I've never rebuilt one of these before.

Link to comment
Share on other sites

The standard bore for a K341 is 3.7505/3.7495.

As long as the bore is no more than 3.753, and the max out of round is less than .003 and taper less than .002. You are good to go with new standard rings.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...