Woods mower on Allis C - belt size?

[SmilinSam 4,030]

Figured out how to route the belt on a friends Woods belly mower on his Allis Chalmers C.

Of course theres no data plates or stickers left on it, but it appears to be a Woods L59. It discharges to the left and runs of a side pto pulley st the rear of the tractor.

The local Agco dealer gave him a Woods 4152 belt (5/8" x 213.4") and when properly routed its a good foot too short give or take. The parts page they printed out that they got their parts numbers off of, isnt even for this tractor by the parts diagram.

I have looked around on the internet but cant find the right belt or belt size for the Allis C application.

Anyone got any ideas?

[rokon2813 272]

226.3 inches.

Based on this; part number is 3652

http://www.messicks.com/wo/3088

and this;

http://www.vbeltsupply.com/catalogsearch/result/?q=3652

[SmilinSam 4,030]

Thanks DandOd

What I cant believe is the mark up the ag dealers put on these belts.

My friend gave $100 for the wrong belt, but you go on ebay or to a belt supply company like you have linked here, and the price is less than half:O

[rokon2813 272]

You are welcome!

And for that mark up, half the time they can't look up or give you the right belt