Would this fit a B series?

[GardenTrACtorguy 32]

I'm skeptical, but would this snowblower fit a B-112?

https://fortwayne.craigslist.org/grd/5776179939.html

[Brettw 1,184]

With the correct hitch, it could work. But it does not have any hitch that we can see, and there are better options out there.

[theniteowl 29]

Yes, this will fit your B-112.  Brett must not have seen the other pictures on CL.

I have the same setup that I use on my 67 Landlord and on my B-112.  Only difference is the lift rod length but those are easy to make.

[Chris727 2,149]

It's not a direct fit. Brett is correct. The hitch shown is for a 3400 or 7000 series with a front PTO clutch on the engine. On the FDT you would have no way to turn the blower off, it would run all the time. Another problem is the RBT blowers have a larger diameter pulley driving the auger and will not turn fast enough. Yes all these parts could be swapped but by the time you locate all of them you'd have probably located a complete FDT blower more easily.

Edited September 25, 2016 by Chris727

[GardenTrACtorguy 32]

Thank you guys, I just wanted to know what to look for if I would want to go and get a snow blower.  Probly will look for one for a B series.