Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
JonetteP

Allis chalmers b-20 something

Recommended Posts

Kent
Jonette, Based on what I've read (no first-hand experience) I suspect he has either a B-206, B-207, or B-208. These tractors had vertical shaft Briggs engines, instead of horizontal shaft like the rest of the B-series. These tractors were made in the Allis-Chalmers plant in Lexington SC, as best as I can tell, and used some Simplicity components -- but not necessarily all. They are not as close to their Simplicity Broadmoor counterparts as the larger "B-series" are to the Landlords or Sovereigns. Here's a peek at the rear end of one, from the Owner's Manual that I've linked in below -- I couldn't find a better view. [A href='http://simpletractors.com/operation/b-207_%26_b-208.htm'][img src='http://www.simpletractors.com/images/207_208/fig_e_pg7_small.jpg'][/a]

Share this post


Link to post
Share on other sites
JonetteP
I have a friend with a allis that is partially restored. He has a tractor with a different rearend than any simplicity I've seen. It is an allis tractor. The rearent looks like a simplicity 2010 series, but it is in a broadmoar frame. We have not been a allis dealer, so this is the reason for the question. Was there a difference in the gearboxes? If so Why? Thank you for your help!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Swandoolie
  • Today's Birthdays

    1. Gcabinet1
      Gcabinet1
      (66 years old)
    2. OrangeBlossomSpecial
      OrangeBlossomSpecial
      (35 years old)
  • Recent Status Updates

    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 0 replies
    • thedaddycat

      thedaddycat  »  SmilinSam

      It's in pretty sad shape, but yes I have a yellow plastic cap that I'm fairly certain is what you need. PM me your details and I'll get it out to you.
      · 0 replies
  • Adverts

×