jsarro 5 Posted November 7, 2016 What is a modern model number for a battery to fit a 7112H? The old simplicity # was 1685058S, but that is not helping much. Thanks Share this post Link to post Share on other sites
Mike_H 92 Posted November 7, 2016 Just go to your local farm store and ask for a 22nf battery. I just bought one today for 63 bucks. Share this post Link to post Share on other sites
jsarro 5 Posted November 8, 2016 Thanks Mike I will check around here and report back. Share this post Link to post Share on other sites
jsarro 5 Posted November 8, 2016 (edited) I just went on Walmart and put make and model and came up with a 51R. https://www.walmart.com/ip/28275660 Looks very high powered 500 CCA. Edited November 8, 2016 by jsarro 1 Share this post Link to post Share on other sites
Kent 435 Posted November 8, 2016 If you can't find a 22NF -- the original spec, a tractor battery -- a Group 51R car battery will fit. Do not get a Group 51, only the 51R which means the poles are reversed. In my experience you can only find 22NFs at farm stores... Share this post Link to post Share on other sites
jsarro 5 Posted November 8, 2016 (edited) Thanks Kent glad to know either will work. It seems the 51R has more CCA. Edited November 8, 2016 by jsarro Share this post Link to post Share on other sites
jsarro 5 Posted November 8, 2016 (edited) The 51R is a little more money but 20% more CCA on average. Edited November 8, 2016 by jsarro Share this post Link to post Share on other sites
Mike_H 92 Posted November 8, 2016 Only thing I didn't like about the 51R is that it doesn't have the lugs on the sides of the case to clamp it in. It was mentioned in another post about the possibility of a tip over and the battery shorting the terminals out against the metal hood. That could be a problem, what with the battery so close to the fuel tank... Share this post Link to post Share on other sites
MrSteele 492 Posted November 11, 2016 I use a 550 CCA battery in my lawnmowers, and put them in for other people, too. Be careful, though, with such a high amperage battery. With a starter generator, it makes little difference. A geared starter, though makes a big difference. If the engine does not start easily, and requires a lot of turning to make it start, you can burn the starter up before starting the engine. Before I put the batteries in, I make certain that the engines start easily, with little more than a bump on the switch, and teach the customer how to start the engine with this battery. Only bump the starter, do not let it grind over and over. If it does not start quickly, look for other problems. Share this post Link to post Share on other sites
jsarro 5 Posted November 13, 2016 Thank you Mr. Steele. I had not considered the potential impact of more CCA. Share this post Link to post Share on other sites