oldbroketractor 0 Posted November 30, 2016 Well guys I have not been on in a while, blame that on my sweet running tractor, Sadly it is in the barn and I can not get it started. When you turn the key the solenoid engages and the motor buzzes but not enough power to turn the motor. Checked wiring, charged battery, jumped solenoid and motor turns, I did not think a bad solenoid would reduce the power to the starter. At a loss for where to go from here. Any ideas? Tractor has the original Kohler 17. Share this post Link to post Share on other sites
maxwood 596 Posted November 30, 2016 Hello, Check the 5 prong plug that connects to the ignition switch they sometimes corrode and cause this issue . Thanks Ken in Mi Share this post Link to post Share on other sites
yukon 331 Posted November 30, 2016 try jumping it off another good battery. 1 Share this post Link to post Share on other sites
ShaunE 1,271 Posted November 30, 2016 I'm betting your starter is wore out. It's 20-30+ years old. Had the same thing happen to mine about 5 years ago. Had it rebuild for around $80 & was told I should jump to the next larger gauge wire due to the length of it. Since I had the engine out, I did that as well. No issues since. Share this post Link to post Share on other sites
BLT 718 Posted November 30, 2016 Dirty connections will imhibit amperage flow. Start there first.. Share this post Link to post Share on other sites