7117 KT17S 24343

[jlesky 0]

Could anyone please post a picture of how the points and condenser are wired on a 7117 KT17s 24343. Does the condenser wire to the points or direct to coil? Is there 2 wires from the condenser. Any help would be appreciated. Thanks.

[MikeES 458]

On the KTs the condenser is wired to the primary side of the coil "-" , and grounded/mounted to the same bolt that holds the coil in place.  Also coming off that same "-" coil terminal is a wire that goes to the points.

The condenser will work at either place, but there is not a good place to mount the condenser near the points cover.

[jlesky 0]

Thanks Mike!

[a_sannine 854]

On all my KTs it is mounted as seen

[jlesky 0]

Thank you a_sannine...very helpful!