shifter knob for high low on foot dragger

[sideburns 15]

Hi looking for a Shifter knob for hi low  on my 65 landlord.I think its the same one used on walk behind simplicity tractors any have one they might want to part with.Its 7/16 thread and Daka Ware chicago writen on bottom of knob.I am also looking for a steering wheel cap for landlord.thanks for any Help

[theniteowl 29]

I would suspect that the knob is identical to the one used for the transmission shifter.  I recall having seen them for sale somewhere or at least ones the same diameter with the same thread size.  Lost one in my driveway/yard somewhere in the last snowstorm.  Let us know what you find.

[bowhunt4life 398]

You could customize the knob too. That's what I did. Got a skull for a shifter and works great.

 

[BryanJ 7]

I am restoring a B-110 now and had both knobs off - it seems the high/low knob was a little larger on my tractor

[theniteowl 29]

May be the same as the knob on the rear PTO lever as well.  My only tractor with Hi/Lo is a Broadmoor 707.  I dont know if the knobs would be the same as the B-110 or even if the one on mine is original.

[rokon2813 272]

Unless mine was wrong, the large frame hi lo knob was different. Mine had a kind of ring around it.

Don't have it anymore so I can't get a picture.

 

[rokon2813 272]

Kinda hard to see but I found this pic on facebook.

 

[sideburns 15]

Thanks everyone for your help with knob.  I found 2 on ebay  guy did not know thread size so I gambled and they where 3/8 The high low is 7/16.So I drilled it out and stuck a 7/16 nut in it.Good enough thanks again.