Hi-lo Pulley INFO????????

[Bunky 3]

Does anyone have a good breakdown of the Hi-Lo pulley I have A 717 and it doesn't seem to slide back and forth ... I see that one of the shift pivots are gone how do they work do they ride on the drum and switch it back and forth or what????

[Kent 436]

I have the exploded parts diagram for the one for the Landlord, but not the Broadmoors. I wonder how similar it is?

[Bunky 3]

FIXED!!!!! The shift pivots were woreout and gone got new ones today works good....

[Kent 436]

Where did you find the pivots -- I assume you mean the small aluminum thingies that have a hard rubber bushing inside them? If you've found some, I'd like to get some spares...

[Sandy_Lake_Imp 2]

We can get the pivots but not the rubber inserts, we have had good luck filling the cavity of the pivot with silicone after placing a plate of the proper thickness thru the slot (with some oil on it so the silicone won't stick to it). Bill

[Kent 436]

I used a rubber stopper and cut a slot in it for the rubber inserts... The rubber is much softer than the original, but it's holding up so far. Next time I put an order together from you Bill, I'll have to get a couple of the pivots....

[Bunky 3]

Well the shift pivots I got seem to be made out of a plastic they are part#156261 and my Breakdown shows no inserts ... so maybe yours is a different model or something and the ones I took out are of the same plastic material...