Vickers T66X

[micbou3]

I am in search of a T66x shaft or a complete T66X. I have this T66X installed on a man lift connected to a torque hub.  The torque hub axle brooke and at the same time brooke the T66X shaft. If you have one for sale I would be interested. I know some tractors have keyed shaft, mine has 24 splines. Have a look at the photos. Thanks 

[theniteowl]

The top half of the pump would have a keyed shaft for the belt drive pulley.  The lower half would have the splined output.

I have an Allis 716 that  had the transmission swapped to hydro so not sure what it originally came out of.  I never used the tractor, just pulled parts.  I pulled the pump off the top but the bottom half is still there.  It may be a while before I could get to it but it's a possibility.  Let me know if you do not find anything in the meantime.

[PhanDad]

http://www.ebay.com/itm/Allis-Chalmers-HB212-HB112-Vickers-Hydro-pump-Assembly-Simplicity-/112315636507?hash=item1a26889b1b:g:QxwAAOSw~AVYsY3b

[micbou3]

PhanDad,

Thank you very much to show that ad. I will contact him.