Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

TimJr

PowerMax rear wheel part number

Recommended Posts

TimJr

Does anyone out there have an Allis Chalmers 616/620/720 parts book?  I need the Allis Chalmers part number for the Ag rear wheels  (8-16 tire).  I have some old Allis microfiche, but I cannot read the whole number with certainty.  Hopefully an old book is around somewhere to get the AC number.  I have the Simplicity number, but in this case I need the Allis number to know if what I am looking for is right.  Or, I need one rear wheel for the Ag tires - don't need the rubber, just a good wheel.  Thanks, Tim

Share this post


Link to post
Share on other sites
TimJr

Hmm, on the microfiche, the number for the Ag wheel is one of the following - I am not able to tell if they are 6's or 8's, and the 5 could be a 6.  These are my guesses.  From the 616/620 fiche -  72087963-5 or 72067963-5.  From the 720 fiche 2087953.  My reader is fairly small, and my large AC reader is put away.  Tim

Share this post


Link to post
Share on other sites
TimJr

Ok, the number you gave 2028910, superceded to 2087953 at some point.  Just to confirm, that is for the skinny Ag wheel, right?   Both NLA from AGCO and Simplicity.  Do you know what year your parts book was printed?  Just curious the difference in the part number since the fiche listed what must be the same number for each generation of tractor ( I just can't read them with 100% certainty, but they all probably listed 2087953).  It is funny how on the AC side the numbers were sometimes listed with the 7 as a prefix, or sometimes used the -X after the number.  I am not sure what the -X was for.  For many years, I knew that adding the 7 to the beginning basically converted the old Allis number to the new Deutz Allis numbering system.

Share this post


Link to post
Share on other sites
midnightpumpkin

There is a part number cross reference on simpletractors.net (the old site), if you have the simplicity number, you can look up the Allis Chalmers number.

That said, the 16 x 8 wheels used on the Case 446 etc fit just fine, the offset is slightly different. I have set of Simplicy wheels on one tractor and the Case wheels on another, it is hard to tell that they are not the same.

Miller Tire has a 16 x 8 six lug wheel with 1-1/8 offset for $70.00 That offset has to be close to what the original wheels were.

John U

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Who's Online (See full list)

    • Mark McDonnell
    • redbeard
    • Bill725
    • BAP
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×