Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

laytonlight

Clutch Rod Assembly - 154364

Recommended Posts

laytonlight

Wanted to see if anyone has had these reproduced or reproduced them. (I checked the repro parts topic.) These are both from Landlords, a 2010 and a 2012. They're for engaging the front PTO. I checked with my machine shop today thinking it wouldn't be a big deal but he said it would be complicated and essentially said at $60.00 per hour it would cost too much. I can't see where it would be that difficult using some good strength stock, one bend and tack on a bolt. I'd try it myself but I never did take that welding course. :( He may have just not wanted to mess with it, but he agreed to make an air filter rod for an old Briggs carb that he thought would not take much time at all. Any idea on why one is longer than the other? Also seems strange that both broke in approximately the same spot. I may check with some weld shops. Just renewed my membership. Glad to be back! 

 

154364.jpg

Edited by laytonlight

Share this post


Link to post
Share on other sites
720nut

A lot of places don't want bothered with a piece there not going to make any money on .

I see your in Mo. or if close I'ld make ya one, shipping would be the killer

Find someone local and have them weld it back together.

 

Share this post


Link to post
Share on other sites
a_sannine
12 hours ago, laytonlight said:

Wanted to see if anyone has had these reproduced or reproduced them. (I checked the repro parts topic.) These are both from Landlords, a 2010 and a 2012. They're for engaging the front PTO. I checked with my machine shop today thinking it wouldn't be a big deal but he said it would be complicated and essentially said at $60.00 per hour it would cost too much. I can't see where it would be that difficult using some good strength stock, one bend and tack on a bolt. I'd try it myself but I never did take that welding course. :( He may have just not wanted to mess with it, but he agreed to make an air filter rod for an old Briggs carb that he thought would not take much time at all. Any idea on why one is longer than the other? Also seems strange that both broke in approximately the same spot. I may check with some weld shops. Just renewed my membership. Glad to be back! 

 

154364.jpg

Buy ur own welder they are cheap , very handy around the house .

Share this post


Link to post
Share on other sites
laytonlight

Thanks for the replies folks. I'm going to check with a couple of small weld shops in the area and see if someone could make a couple of these up. Maybe next tax return for the welder. :D

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Who's Online (See full list)

    • Mach1martysr
    • AdamS
    • mikeandlina
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×