prez Posted March 24, 2002 Share Posted March 24, 2002 For some reason I cant post peply to mph last post so here it is. you can move it (hydro leve) till your blue in the face and not get yhe perfect spot if switch is not working or in the wrong spot if my switch is not in wright spot it takes luck to get it to start. Sometimes it wouldnt start at all. Link to comment Share on other sites More sharing options...
powermax_paul Posted March 24, 2002 Share Posted March 24, 2002 Not that I recommend such action, but I have all my neutral safety switches jumpered. Paul Link to comment Share on other sites More sharing options...
powermax_paul Posted March 25, 2002 Share Posted March 25, 2002 I should clarify. The NEUTRAL safety switches are jumpered. The PTO safety switches are still functioning. These safety devices are a little more important. I'm sure Floydster has his set up the same. By defeating the neutral safety switches, your biggest risk is burning up your starter. The tractor could start and start moving, but the delay caused by pressure-up on the hydro should allow you to stop the unit before running into the back of the wife's car. Paul Link to comment Share on other sites More sharing options...
Floydster Posted March 25, 2002 Share Posted March 25, 2002 I'm the same as Paul, had too much trouble with the saftey switch's, haven't had any trouble since, I am the only one running these tractors. Floydster Link to comment Share on other sites More sharing options...
Recommended Posts