Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
PGL

Rusted out seat pan 620

Recommended Posts

ShaunE
On 8/30/2017 at 0:32 PM, PGL said:

Have any of you replaced/repaired the seat support for a Powrmax, 4041 etc.?  Ideas?

IMG_1257.JPG

I will try to load some pictures tomorrow.  I have not performed this on a Powermax but I have done this on two sovereign platform tractors.

I bought the seat @ Farm & Fleet.  Then took a piece of Aluminum 1/8" or so that was big enough to cover the holes in the bottom of the seat & the slots in the hinged seat support that is bolted to the seat pan.  I added bolt spacers from Ace Hardware to allow the bolt head clearance between the aluminum plate & the bottom of the seat.  I did not want to drill another set of holes in the seat pan & I did not want to buy a new Simplicity seat.  It sounds confusing but hopefully the pictures will give you a better idea.

IMG_1401.JPG

IMG_1402.JPG

Edited by ShaunE
Pictures
  • Like 1

Share this post


Link to post
Share on other sites
wwbragg

Here are some pictures of the seat and mounting bracket from my 9020.  The seat back is at the top of the pictures.  You could buy a universal seat for $50 plus shipping.  (see http://www.ebay.com/itm/Universal-Tractor-Seat-Padded-Steel-Pan-Seat-for-Tractors-Fits-Many-Models-/292098233740?hash=item440269558c:g:cYsAAOSwGvhT9q7Z) and bolt it to your mounting bracket.  It looks great on my 707.  The mounting holes on the your seat bottom are rusted away but If you want to stay original, you could cut out the rust and tack-weld a piece of 18 or 20 gauge steel to the seat bottom.  Then tack-weld a 3/8 or 1/2 inch nut to the center and use the existing mounting plate (if yours looks like mine). 

Then you'd have to reupholster the seat.  From the presence of the rivets I'd say it has been recovered before.  I just paid $100 to have a seat reupholstered for my 7119. It also looks great, but it was $100.  Unless you want to stay strictly original, I'd recommend the universal seat.

2017-09-07 20.38.33.jpg

2017-09-07 20.37.35.jpg

2013-11-09 18.15.34.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • simplewrench
    • BAP
    • CarlH
    • tadams
    • littlefan
    • jbrooks
    • RickS
  • Today's Birthdays

    1. Bradley sweedman
      Bradley sweedman
      (62 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 1 reply
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×