Powermax rockshaft

[720nut]

Anyone ever take the shaft apart ?

Need to remove lift arms and don't see anything that holds them as pins or keys.

Don't want destroy the shaft trying to push them off

[720nut]

OK while grass was wet decided to try and remove.

found it rather easy as there is a wire c-clip on the end of shaft and a little heat and hammer it came right apart.

wish I knew how to highlight things like some do, anyway on right side I tried knocking it off and couldn't so thought beat it to the left and that's when  I discovered c-clip

Once I removed keys everything just slides off shaft rather simple design but more than serves the purpose.

I doubt anyone ever has a problem with these but now we all know what makes them tick. same thing on left end.

Old piece for a new project I have planned.

Order of assembly.

Edited September 26, 2017 by 720nut

[maxwood]

[maxwood]

oops too late 

 

Thanks Ken in Mi

[720nut]

Thanks Ken just had some free time and decided to try, now that I see this I could have just looked at my parts manual.

[Talntedmrgreen]

Good info to know!  You will like that assembly better than what they came up with for legacy's anyhow.  Will watch with interest...