Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Front Loader


casinojim

Recommended Posts

6-7 years ago I bought a FEL off a tractor forum. It was installed on a 60's Simplicity Garden Tractor before I bought it, and he had posted a video of it running, which I might still have someplace. My plan was to make an adaptor to mount it to my 7010 or 7016 1970's Simplicity, but I never got around to it, and never will. The pump, controls and cylinders are all there, however the cylinders should be rebuilt or replaced. This can be adapted to any garden tractor with some steel tubing and a welder........would this work on my 7117.  ???????

00c0c_3bR4aYnSpww_600x450.jpg

00303_EjQONdOy8U_600x450.jpg

00909_3f8KXHS7j5n_600x450.jpg

00D0D_5Xxo48VtBrD_600x450.jpg

00x0x_grh8Hip1u0y_600x450.jpg

Link to comment
Share on other sites

It will work on anything you make it fit on.  I used the front clutch setup to run the pump on my 712 back in the day.  Ingenuity is all you need, but a bandsaw & a welder make it easier.

Tie that subframe all the way to the rear implement brackets & I used the existing two holes in the frame in the front of the tractor.  That way it can be removed easily & doesn't butcher the tractor.

 

https://simpletractors.com/forums/topic/53778-loader-for-homelite-t16/

 

Edited by ShaunE
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...