Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

720nut

New rear shoes

Recommended Posts

720nut
9 hours ago, Talntedmrgreen said:

I got a set of those that needs a home, if anyone is wanting to keep up with Lloyd 😉

 

what size are yours Lloyd?

 

DD0E19F4-55A3-4F9F-8B4A-2D4E35348233.jpeg

31x15.50x15 they are rim guard off skid steer, what are you asking ?

Share this post


Link to post
Share on other sites
Talntedmrgreen

Not sure yet.  I got a bunch of junk today.  Need to unload and sort through it all.  Danco loaders are fallin out of the sky on me 😳 brought home both varieties now, and turned down as many.  Back of the truck is full too...dont even know whats there because the fella just kept throwing more in.

18AF1D55-B43E-4470-A5C9-6CC504BEB209.jpeg

F1B7AFAC-83EA-4ABE-A498-7D4288B9005C.jpeg

392CF35E-6432-4154-9DC4-ED443C4FD384.jpeg

D0E2885A-AEAB-445B-900F-71B060813003.jpeg

DAFDC3F2-CDEF-47E1-8477-D03B57B673DE.jpeg

 

 

1FDA74B1-6A96-42A0-A2CB-3EF93F8E8A10.jpeg

Share this post


Link to post
Share on other sites
720nut
6 minutes ago, dhoadley said:

"Danco loaders are fallin out of the sky on me 😳 "

Must be nice to know people.

Just what I was thinking Dave as I've looked for 2years for another and nothing, then I finally do find one and look what happens,sm06 they're falling out of the sky.

It's good you find all of this but don't you think it time to share?  666

Also wondering why you took the loader off wouldn't it have been easier to load on tractor seems it would have taken just as much room either way ?

Edited by 720nut

Share this post


Link to post
Share on other sites
jlasater

I'd be interested in the front blade if it fits a 9020 and is in decent shape...preferably with the lift cylinder. PM me if you're open to an offer...if not, no worries.

Edited by jlasater

Share this post


Link to post
Share on other sites
Talntedmrgreen
16 hours ago, 720nut said:

Just what I was thinking Dave as I've looked for 2years for another and nothing, then I finally do find one and look what happens,sm06 they're falling out of the sky.

It's good you find all of this but don't you think it time to share?  666

Also wondering why you took the loader off wouldn't it have been easier to load on tractor seems it would have taken just as much room either way ?

I’ll share anything I have!  What would you like?

The loader was off when I arrived.  I didnt have time to try and clean up the fittings, find fluid and reassemble.  I was against the clock and so we were just tossing stuff in.  I think a couple fittings will need replaced from exposure and rust or I will have a leaky mess.  Loader is solid though.  ROPS is real nice.  Most of this needs to find new homes soon. 

One of the loaders will go for sure. The SV40 I have was blasted and painted orange.  It might need a few fittings or hard lines but is otherwise all there and ready to assemble.  If I keep it, it will become white for the Wards. 

30ED8CEA-73C0-4FAE-80FC-839BD851B3AB.jpeg

Share this post


Link to post
Share on other sites

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 7 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×