Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Dennis Adams

Allis Chalmer 712 - Parts Needed - Looking for front PTO assembly

Recommended Posts

Dennis Adams

IMG_5470.thumb.JPG.4f2f8d098aea3522f7c882d2bd3d48a2.JPGIMG_5481.thumb.JPG.b541493c28eb4227e4bec8930ccbf039.JPGI'm looking for the front PTO assembly for my AC 712 Hydro. I'm trying to hook up a snow blower to it. Feel free to email me: dadams.us@gmail.com

cell: 717-926-5744 or txt

Thanks!

Respectfully,

Dennis Adams

IMG_5456.JPG

IMG_5474.JPG

IMG_5483.JPG

IMG_5472.JPG

IMG_5446.JPG

IMG_5449.JPG

IMG_5454.JPG

Edited by Dennis Adams
Add additional photos

Share this post


Link to post
Share on other sites
GregB

Welcome to the site.  Wanted ads have a separate area to be posted. 

Now if you were asking how to install , or adapting an electric clutch this would be the right place.  

Is the front shaft diameter 1" or 1 1/8"? 

It looks like you have the right hitch for the front clutch set-up.

Share this post


Link to post
Share on other sites
Dennis Adams
23 minutes ago, PhanDad said:

 

23 minutes ago, PhanDad said:

Hello PhanDad,

My AC 712 Hydro has a 1" front shaft. Do you recommend any electric front PTO assemblies that work for my tractor? I wouldn't know where to begin to be honest.

thanks

Dennis

Share this post


Link to post
Share on other sites
PhanDad
23 hours ago, Dennis Adams said:

 

Hello PhanDad,

My AC 712 Hydro has a 1" front shaft. Do you recommend any electric front PTO assemblies that work for my tractor? I wouldn't know where to begin to be honest.

thanks

Dennis

I've run a Warner #5215-142 electric clutch on the Briggs 16HP single cylinder engine to drive a Simplicity snow blower:

 Rebuild_0003.jpg.de5b14b127c30b81d081fa3536373977.jpg

It's for a 1" shaft.  Another manufacturer's alternative:

https://www.ebay.com/itm/Replaces-Warner-5215-142-PTO-Clutch-HIGH-TORQUE-Bearing-Upgrade-OEM-UPGRADE/251547341794?hash=item3a9163d3e2:g:kjAAAOSwI-BWGEYb

I'm not sure it would work for you directly "out of the box".  IMO, the most important thing in replacing the clutch is to make sure the pulley is in the same location (front-to-back) so that the drive belt basically goes straight down as the original did.  With today’s “single unit” clutches, the position of the “step” on the crankshaft determines the location.  You may need to add a spacer.  A pic of a typical Briggs shaft:

 IMG_9048.thumb.JPG.12903654d9a05afb6916bfa14f0f83f3.JPG

I thought most Kohler single cylinder engines were 1-1/8" shafts, and a Warner #5215-140 fits those.  From the alternate manufacturer: 

https://www.ebay.com/itm/Replaces-Warner-5215-140-5215140-PTO-Clutch-Free-Bearing-High-Torque-Upgrade-/251911195211?hash=item3aa713ca4b:g:h5sAAOSwo6lWGwa

 

Share this post


Link to post
Share on other sites
Dennis Adams

Hello,

1.) May I ask what the I.D. for the clutch you posted?

It appears some Kohler 12hp come with (1 1/8") O.D. Front PTO Shaft. My Kohler K301S has (1.0") O.D. Front PTO shaft. 

2.) What is the price please?

Thank You!

Respectfully,

Dennis

Share this post


Link to post
Share on other sites
Dennis Adams

Hello,

1.) May I ask what the I.D. for the clutch you posted?

It appears some Kohler 12hp come with (1 1/8") O.D. Front PTO Shaft. My Kohler K301S has (1.0") O.D. Front PTO shaft. 

2.) What is the price please?

Thank You!

Respectfully,

Dennis

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×