sideburns 15 Posted March 11, 2018 I have a 65 landlord 101 with hydro lift . Is there a way to use my snow plow and use my mid mount scraper blade at the same time.I think I need the right hand lift lever are they hard to find .anyone have any pics of this set up thamks for any help Share this post Link to post Share on other sites
Chris727 1,703 Posted March 12, 2018 Afraid that won't work without further mods. The mid mount blade and snow plow both attach to the same point on the front axle so you cannot have two items attached at the same point. The dual lift lever was intended for using a rear implement in addition to a mid-mount or front mount implement. Share this post Link to post Share on other sites
sideburns 15 Posted March 12, 2018 Thanks for the info chis Share this post Link to post Share on other sites
GregB 878 Posted March 12, 2018 (edited) I think you can mount two to the front, they just off set. Use longer pins. Put the plow in the usual position, grader off to the side.. Edited March 12, 2018 by GregB Share this post Link to post Share on other sites
Talntedmrgreen 1,915 Posted March 13, 2018 This is what I do. The mid and front implements pin up fine, but it can be a handful lining up all those holes. Share this post Link to post Share on other sites
Chris727 1,703 Posted March 13, 2018 Will have to give that a try sometime. Share this post Link to post Share on other sites
oldsarge 49 Posted March 13, 2018 Mr Green,It looks like it would take a 3 armed orangutan to effectively operate that machine!............................................................................gtm Share this post Link to post Share on other sites
Talntedmrgreen 1,915 Posted March 14, 2018 Pretty much! Share this post Link to post Share on other sites
JohnFornaro 37 Posted March 17, 2018 Mr Green! That is quite a rig! Izzat a trencher on the back? Share this post Link to post Share on other sites