Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Voltage regulator


Bunky

Recommended Posts

Hi, Give us a call at 1-800-462-2218 We stock the regulator to fit them. The regulator needs to have a 10 amp current limit, most generator regulators the current section is 20 amps or up. Good luck, Al Eden
Link to comment
Share on other sites

I have a 3410S and I trying to find a voltage regulator for it the book says it's a 122193 but that part number is no longer available can someone help... On mine the light stays on until i ground out the field then the light goes out and stays as long as you keep it reved up.....any ideas...?????
Link to comment
Share on other sites

Try removing the cover, usually two screws. Look carefully at the coils. I had a B/S 10Hp and one of the wires going to a coil broke. I fixed it with a crimp connector. If you have the wiring diagram, you can refit nearly any voltage regulator from a generator, to this engine. If you had one from another engine with a generator, I could probably help you figure how to hook it up. I think I have the wiring diagram somewhere at home. I will try to find it. Rod H.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Who's Online (See full list)

    • maxwood
    • PhanDad
    • Bill725
  • Recent Status Updates

    • gwiseman

      gwiseman

      As you know SimpletrACtors.com has changed some recently. Working through this so PM me with questions, suggestions, and/or challenges you have. Appreciate your patience and feedback.
      · 0 replies
    • gwiseman

      gwiseman

      Site programming updates were made 3/23/2024. As a result some things have changed including dues payment options. We will continue maintenance and work with technicians to regain credit card payment option and clear up minor challenges. On positive it appears attaching pictures is now easier. Good day. Gene 
      · 1 reply
  • Adverts

×
×
  • Create New...