Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Replacement motor for a 7117


casinojim

Recommended Posts

A friend lent out the  tractor  and came back like this but he got a motor in the shop but not sure what HP or if it will fit

IMAG0761.jpg

IMAG0760.jpg

IMAG0759.jpg

IMAG0758.jpg

IMAG0762.jpg

Link to comment
Share on other sites

6 hours ago, ShaunE said:

18 or 20 Magnum.

If the engine is good, swap all the tin & rewire the key switch.

What the???

That advice from a KT fan?9_9

Link to comment
Share on other sites

5 hours ago, fishnwiz said:

What the???

That advice from a KT fan?9_9

The first 4 pictures are an 18 or 20 hp Magnum.  If it's a good engine, the tin can be switched & the key switch replaced or rewired & it will work just fine.

  • Sad 1
Link to comment
Share on other sites

You will need to trim the frame slightly (about 1/2" or less) to accommodate the filter.  I am running a M20 in all three of my 900/7100 series tractors.

You will need to find the plastic fins for the flywheel to have cooling. 

The tin from a KT will work but you will need to remove the baffling in the fan shroud, for the mag/electronic ignition to fit.

Link to comment
Share on other sites

  • 2 weeks later...

Good and bad news good found all the tin for the motor dOd bad only got 70 psi in each cylinder so he put it back in the Warehouse thanks for your information about this one anyway

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...