Danco Loader Filter?

[Talntedmrgreen]

Anyone with a Danco loader, or knowledge from having one previously, able to suggest the proper filter?  I am about done with my restoration of an SV-40 and wanted to get it mobile....I entirely overlooked the need for a filter.

Thanks!

[BenB]

I have been using Bobcat no. 6515541 filters, so far no problems. Perhaps take your old filter to a Bobcat dealer to confirm it is suitable. 

[Talntedmrgreen]

Thanks Ben!  I don't have an old filter to match to....that's my issue.  I bought the loader in pieces and it had a cap threaded on to keep the port clean, but no filter.

I did get WIX#51553 from another member here, in case anyone is interested down the line.  Another filter being used is Purolator 6677360.  

Ben, Looks like your 6515541 is a match to the WIX.  Also:

Donaldson P551551 (10 micron)  (P551553 25 micron)

Fleetguard HF6056 (10 micron)

Hastings HF732 (20 micron) / HF731 (10 micron)

Baldwin BT839-10 (10 micron)

WIX 51553 (30mic), 51552 (20mic), 51551 (10mic)

 

[tadams]

I use a NAPA Gold filter # 1453 for hydraulics on my Danco loader on the 4041

[Talntedmrgreen]

5 minutes ago, tadams said:

I use a NAPA Gold filter # 1453 for hydraulics on my Danco loader on the 4041

Thanks Tom!  Napa is the only shop I pass on my way home unless I take a detour.  Looks like that one is a 35 micron.  

Looks like that opens the door for more.  WIX 51453, Baldwin BT274, Fram P1655, Purolator 6681138, etc etc.