PTO pully spacers

[CVSB10JCS 9]

i removed both pully wheels?  that the mower deck belt runs thru to clean & lube them and now cant remember which spacer goes where!  the stationary pully has a carriage head bolt and fits in the sliding slot and the other pully bolts to the swinging arm under the tractor.  i guess they are called idler pullys?   i got two bolts and assorted flat washer and lock washers and two spacers.   one is thicker (spacer- er) than the other.

[wwbragg 501]

I suggest you look up the deck's model # on partstree.com or jackssmllengines.com and use their pictures as a reassembly guide.

Edited July 18, 2018 by wwbragg
correction

[MikeES 417]

The carriage bolt goes in the slot for sliding the v pulley back and forth.  The other pulley is bolted ( with std bolt) to the upper tab of the swing arm with the spacer between the tab and pulley.  Washers on each side of pulley, and any extra washers used for fine tuning alignment with the inside cone clutch pulley.