Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Need close-up pictures of frame/latch


johnmonkey

Recommended Posts

I need a close-up picture of the frame for a dozer blade. Specifically how it mounts on the front of a simplicity/AC. Do they attach to the forward most holes or the holes used to attach the front of a mower deck? I just bought a 20' long piece of 3/8 x 1.5" flat stock to fabricate a frame that I can mount on the front of my simp 725. I also need a close up picture of the latch mechanism for a drop bucket. A friend had an old drop bucket from a gravely and I need to make a frame for it and the latch mechanism is missing. Thanks for your help John H. PS I'm not going into business or compete with our sponsors, I just need the above for my personal use.
Link to comment
Share on other sites

From simpletractors new in 1959: http://www.simpletractors.com/images/new_in_1959/dozer_pg5.jpg
Link to comment
Share on other sites

From simpletractors new in 1963: http://www.simpletractors.com/images/new_in_1963/dozer_pg11.jpg
Link to comment
Share on other sites

You use the same holes as the mower mount. As of yet, I have found nothing that mounts in the front holes. Maybe someone else can elaborate as to what these holes are for. Pat
Link to comment
Share on other sites

The front holes at least on my 7790 same as 7100 are for snowblower frame mount. This & $1.00 might get you a small coffee Maynard aka/UCD
Link to comment
Share on other sites

On the B series snow blower the front holes are used to lock the clutch part of the blower in place, least that's what I use them for..MPH
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...