Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

720nut

Day has come

Recommended Posts

PhanDad

A lot of your great work is leaving, but you still have all (or most anyway) of the memories - the good, bad, and ugly.  

Hopefully they'll be well cared for and continue to "live on" and at least double their age before they go to tractor heaven.  

 

  • Like 1

Share this post


Link to post
Share on other sites
720nut
17 minutes ago, PhanDad said:

A lot of your great work is leaving, but you still have all (or most anyway) of the memories - the good, bad, and ugly.  

Hopefully they'll be well cared for and continue to "live on" and at least double their age before they go to tractor heaven.  

 

My hopes exactly, few more as they were leaving, hard to part with but life must go on.

DSCN2465.JPG

DSCN2466.JPG

DSCN2467.JPG

DSCN2468.JPG

DSCN2469.JPG

  • Like 1
  • Sad 3

Share this post


Link to post
Share on other sites
gwiseman

That would have been tough for me Lloyd!:(  You had a great ride and I learned a lot about the Powermax/720 series through your posts. Never know - a bargain may present itself and you can fall right back into step again down the road. 

  • Like 1

Share this post


Link to post
Share on other sites
720nut
55 minutes ago, gwiseman said:

That would have been tough for me Lloyd!:(  You had a great ride and I learned a lot about the Powermax/720 series through your posts. Never know - a bargain may present itself and you can fall right back into step again down the road. 

I don't plan on going anywhere as I still have a couple of Allis's and if we can continue to help a few people it will be all worth it.

Plan is to build grand daughters an Allis pulling tractor, possibly a B 112

  • Like 2

Share this post


Link to post
Share on other sites
720nut
20 hours ago, tadams said:

But what you going to do with all that empty space, you need something to walk around instead of being able to just walk straight through the area.

It is nice to be able to get to my mill and lathe without moving a bunch of things.

Brand new pulling tractor, bigger and badder.

Possible rollcage for a friend,  new pulling tractor for my fatherinlaw , so right now I'll have plenty to keep me busy and step over

Yes I just built one but am making changes and decided it better to build new as cut this one apart, for those of you who enjoy the pulling world I'll start a new thread and document the build.

  • Like 1

Share this post


Link to post
Share on other sites

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×