Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

4041 control rod bushing needed


Gcabinet1

Recommended Posts

Hi Guys 

Does anyone know where I can get( Simplicity 2172949) its the bushing that goes in the control rod for the hydro

mine is bad and the tractor will start to inch forward o its own when in neutral.

I checked a few places on line and it says its no longer available!!

Thanks G 

Link to comment
Share on other sites

If I remember correctly, the two that are located in the control rod maybe the same as the two that are located in the rear PTO/engine coupler.  Those are 2177943SM.  I replaced all of mine with new in 2008 but obviously they were still available then.  If not the same part # they still may work.  They also may be close to the same configuration as the 1650592 - Cam Roller used on the Sovereign Sundstrand Hydro unit control group.

I hope this helps.

Link to comment
Share on other sites

Me, you and every body else with a powermax if anybody finds a bushing please tell I think I used a cut 3/8 pvc tubing and then slid the next size pvc tubing over that to fill the void, obviously not a permanent solution I gotta do my 620 yet I’ll see if that bushing Shawn’s talking about works.  None  of mine have anything left of the bushing I don’t even know what it looks like was it rubber Shawn 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online (See full list)

    • PhanDad
    • Bill725
    • GregB
    • TTDE419
  • Recent Status Updates

    • gwiseman

      gwiseman

      As you know SimpletrACtors.com has changed some recently. Working through this so PM me with questions, suggestions, and/or challenges you have. Appreciate your patience and feedback.
      · 0 replies
    • gwiseman

      gwiseman

      Site programming updates were made 3/23/2024. As a result some things have changed including dues payment options. We will continue maintenance and work with technicians to regain credit card payment option and clear up minor challenges. On positive it appears attaching pictures is now easier. Good day. Gene 
      · 1 reply
  • Adverts

×
×
  • Create New...