Simple7117 Posted October 25, 2018 Share Posted October 25, 2018 Hello, I found a 42" snowblower for my 7117 but it did not come with a single pulley hitch. I am planning on making one but I cannot find the dimensions on line and do not know of one local to copy. Does anyone have the dimensions or know where i can buy one? Thanks Quote Link to comment Share on other sites More sharing options...
rockfangd Posted October 25, 2018 Share Posted October 25, 2018 (edited) Hello. I may be able to help you. I have a 42" on my 7116. So you want the pulley size on the hitch itself correct? Ok so my hitch pulley measures 5" OD. canter bolt is about a 5/16 (just by looking at it) possibly 3/8 .Hope this helps. Let me know if you need a picture Edited October 25, 2018 by rockfangd Quote Link to comment Share on other sites More sharing options...
Bill725 Posted October 25, 2018 Share Posted October 25, 2018 I think one of our members, RayS, was fabricating them. I suggest sending him a PM. 1 Quote Link to comment Share on other sites More sharing options...
Simple7117 Posted October 25, 2018 Author Share Posted October 25, 2018 Thanks for the offer to help. I found the picture with these measurements last night. I just need the width of the center bar and how far in the pulley is mounted and the pulleys approximate angle if possible. 1 Quote Link to comment Share on other sites More sharing options...
rockfangd Posted October 26, 2018 Share Posted October 26, 2018 I will try and send a few pics of mine but it probably wont be until Saturday when I have a little more free time Quote Link to comment Share on other sites More sharing options...
Simple7117 Posted October 28, 2018 Author Share Posted October 28, 2018 I placed an order with RayS for one. Thanks for the help and information Quote Link to comment Share on other sites More sharing options...
rockfangd Posted October 29, 2018 Share Posted October 29, 2018 (edited) For the pulley? And you still need the width of the hitch? I just mounted mine today so it is ready to go. If you measure the inner edge of the receiver on the tractor that should be your width. I would be glad to check mine if you like Also note that the flat edge of the belt rides on the bottom of the pulley, there is also a plate mounted with the center bolt that keeps the belt onto the pulley. Edited October 29, 2018 by rockfangd Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.