Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Single Pulley snowblower hitch dimensions?


Simple7117

Recommended Posts

Hello,

 I found a 42" snowblower for my 7117 but it did not come with a single pulley hitch.  I am planning on making one but I cannot find the dimensions on line and do not know of one local to copy.  Does anyone have the dimensions or know where i can buy one?   Thanks

Link to comment
Share on other sites

Hello. I may be able to help you. 

I have a 42" on my 7116. 

So you want the pulley size on the hitch itself correct? 

Ok so my hitch pulley measures 5" OD.

canter bolt is about a 5/16 (just by looking at it) possibly 3/8

.Hope this helps. Let me know if you need a picture

Edited by rockfangd
Link to comment
Share on other sites

Thanks for the offer to help. I found the picture with these measurements last night.  I just need the width of the center bar and how far in the pulley is mounted and the pulleys approximate angle if possible.  

IMG_1187.JPG

  • Like 1
Link to comment
Share on other sites

For the pulley?

And you still need the width of the hitch?

I just mounted mine today so it is ready to go. 

If you measure the inner edge of the receiver on the tractor that should be your width. I would be glad to check mine if you like

Also note that the flat edge of the belt rides on the bottom of the pulley, there is also a plate mounted with the center bolt that keeps the belt onto the pulley. 

Edited by rockfangd
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...